Guide To Using PokerRNG 6.0

PokerRNG 6.0 was designed with ease of use as a top priority and has been fine tuned to include users suggestions to make it even better. This area will provide you with everything that you need to know in order to use PokerRNG 6.0 successfully.

This guide includes instructions for PokerRNG version 6.0 as a whole including the 6.1 sub version update.

Upgrading to PokerRNG 6.0

If you have purchased an earlier version of PokerRNG from the official PokerRNG.com web site you are entitled to a free upgrade of 6.0. You will need to lookup your access codes for 6.0 as this information has been updated. If you have any old access id information it will not work with 6.0.

You can lookup your account information by visiting this form here:
http://www.pokerrng.com/site2/forgot_login.php

If you have changed your e-mail address or if the e-mail you used when purchasing your previous version is no longer accessible to you then you will need to contact support to track down your login and update your e-mail. If you still have the same e-mail enter into that form on the link above and your access codes will be sent over to your registered e-mail.

Installing PokerRNG 6.0

To download the setup files for version 6.1.0 you can either request the download link from our site at the Download PokerRNG 6.0 button above or by logging into the members area (if you are a member) and downloading the newest update from there.

The setup file will have the filename of setup_rng_610.exe or if a new version is out it will reflect a similar file name. Double click this file and the setup will load. It is very easy to install, simply follow the on-screen displays, read the information and click Next or Finish at the end.

Once the PokerRNG 6.0 software is installed you should see a desktop icon that says PokerRNG v6. To launch the software click this icon. If there is no desktop icon you can find a shortcut to PokerRNG 6.0 on your start menu, choose Programs and scroll down to PokerRNG.

Logging into PokerRNG 6.0

The login process is very straight forward and only requires your access id and your member id. Please note that when you login to PokerRNG 6.0 for the first time the software will send your computer id to our login server. This means that you will only be able to use your PokerRNG 6.0 license on that specific computer system. Be sure to install and login only on the computer that you want to use the software on. If by chance you have already installed the software on a laptop and now you want it on your desktop you can have your login reset which will lift the computer id from our system and then you can install and login from another computer. This reset process is only allowed to be used once per 7 day period so make sure it's the computer you want to have it installed on.

To login enter your access id and member id into the proper forms on the login screen. Make sure you do not have your member id mixed up with access id as this is a common mistake that will bring up a message telling you your ID's are wrong.

Once you have your ID's entered simply click Login and if your information is correct you will have access to the software.

Choosing your Poker Room

Upon logging in you will see a screen asking you to choose your poker room. At this time if your poker room is not already loaded you should load it now. Click on the poker room you'd like to use and then click OK. The PokerRNG 6.0 main screen will now load.

Using Manual Mode Tracking

If your poker room is only supported with Manual Tracking in PokerRNG 6.0 you will need to input card values from your poker table. You can only use 1 poker table with PokerRNG so be sure not to enter in values from multiple tables.

Once the main PokerRNG screen loads you will need to enter in your hole cards minus the suit for the current hand. If you are not yet seated you can take a seat and then enter in your hole cards once they appear for you. If you just want to watch the table enter in "A A" for your hole cards. Entering in "A A" for your hole cards every hand will allow the software to only record community card values and is a way to be able to see RNG Results without sitting at the table.

So if you are actually playing you can enter in your hole cards when you are dealt in or if you are just watching you can simply enter in "A A" for every hand as your hole cards. After your hole cards are entered in next you enter in the flop cards minus the suit values  then the turn and the river. If by some chance the flop is never shown due to everyone folding simply click CL on the Keypad. If only the flop is entered and the hand ends before the turn and the river that is fine. If the hole cards are entered along with the flop it is always acceptable to click OK at this point. The RNG results can be calculate with at least the hole cards and the flop.

Try to choose a table where the majority of hands are going to the river. This is very important for best results. If you are seeing a lot of flops without the turn and river your accuracy will be lower. If you are not seeing as many flops and hands are ending early this is another reason for low accuracy. Also be sure to enter in the card values correctly. If you enter in a wrong value it isn't the end of the world but your session results will be lower in accuracy. You should note that manual tracking is not added into the database. So if you make a mistake it will not corrupt the global database on a user wide level. It will only affect your individual session.

Using Automatic Tracking

Automatic tracking does not require anything more than having everything setup correctly. To use automatic tracking make sure your video settings are setup for 32 bit color and your DPI settings are set to 96 DPI. You can get to these settings by going to your Windows Control Panel and choosing Display. Go into Display and choose Settings. In this settings area you will see Color Depth options. Make sure this is set to (32-Bit). Next click Advanced on this same screen. You will see DPI Settings in this screen make sure this is at 96 DPI.

Once you choose an automatic tracking site you will see the Table Selector on the right hand side where the Keypad would be in manual tracking. If you see a box with "Seat 1" choose your seat number starting from the right of the dealer counting clockwise to your seat. If there is no seat box you do not have to enter in your seat position. Now there are 2 buttons labeled Table and Chat. You will need to click and hold down the left mouse button on the button labeled Table. Drag your cursor while still holding the left mouse button down over to your poker tables title bar and then release the left mouse button as the cursor is over the title bar. Do the same for the Chat button. Click the left mouse button down while over the Chat button on the PokerRNG 6.0 window and then drag the cursor so that it is over the poker tables chat box area and then release the left mouse button. You should now see the Table and Chat buttons disappear and some text replaces it showing you the Table ID and Chat ID followed by some numbers. The numbers represent the actual software ID of these two objects (Table and Chat area).

Once you complete these steps PokerRNG will start automatically. It is important that you are first sitting down at the poker table and are dealt into the hands. If you do these steps and the software does not start tracking click the small X in the same area as the Table and Chat ID's with the trailing numbers (not the main X to exit the software). This will allow you to re-setup the Table and Chat ID's and restart the tracker.

From here PokerRNG 6.0 will automatic gather the cards and place them where they should be. It will automatically calculate all upcoming hands and so on without requiring any input from you.